License #: CAC1821281
Gallery
HVAC Estimates & Installation
We are offering FREE ESTIMATES on new installations! Do not use this form for urgent or emergency needs.
I recently completed a job at a Kadeco Inc company. The job involved adding an inverter mini-split to a garage for a nice cool work space and game room. The mini-split was installed on the wall and connected to a thermostat to control the temperature. The installation process was complex, but the customer was pleased with the results.
We are replacing an apartment A/C due to age and non-efficiency. The old unit was 20 years old and had been experiencing frequent breakdowns. The new unit is a high-efficiency model that will provide better cooling and energy savings for the residents.
I was hired to replace an old A/C unit with a new, more efficient model. The old unit was over 10 years old and was no longer able to keep up with the demands of the home. I removed the old unit and installed the new one, making sure to follow all safety protocols and procedures. The new unit is much quieter and more efficient, and the homeowner is very happy with the results.
Working on several commercial units at once making them run as they are supposed to !
I was hired to remove a few pieces of equipment from a portable building that was being demolished. The building was being moved to a new location for a non-profit organization. I used a forklift to lift the equipment and then carefully removed it from the building. I also had to dispose of the furniture and equipment properly.
I was called to a home in the suburbs to replace the old existing 20 year A/C system. The homeowner was thrilled with the increase in comfort and energy efficiency.
"I was dispatched to a no cooling call where the outdoor unit was completely covered by overgrown vegitation. I was able to clear the vegitation and get the unit running again.
I was called to a home to check on a dryer that wasn't heating up. I found that the vent was clogged with lint and debris. I removed the vent and cleaned it out. I also checked the condenser unit and found that the fan was not working properly. I replaced the fan and the dryer started working again. The customer was very happy with the service and thanked me for my help.
I was called to a home to inspect a malfunctioning air conditioner. Upon arrival, I discovered that the unit had been overgrown with vegetation, preventing it from functioning properly. I used a ladder and pruning tools to clear the overgrowth, ensuring that the unit could breathe and work efficiently.
I was called to a home to inspect a malfunctioning air conditioner. Upon arrival, I discovered that the unit had been overgrown with vegetation, preventing it from functioning properly. I used a ladder and pruning tools to clear the overgrowth, ensuring that the unit could breathe and work efficiently.
Cleaning an evaporator coil is an essential part of maintaining an A/C system. It helps improve energy efficiency, lowers utility bills, and extends the lifespan of the unit. To clean the coil, I use a specialized vacuum cleaner with a soft brush attachment to remove dirt, dust, and debris from the fins and coils. This process helps improve airflow and prevents the unit from overheating. Regular cleaning also helps prevent mold and mildew growth, which can be harmful to the health of the occupants.
Service Call - Compressor on a 2016 Goodman condenser went bad. We will replace compressor under warranty
Service call “water leak from A/C” Not having a safety switch installed on your A/C drain can result in major damage to the home. On this particular call the damage was quite severe resulting in structural damage. I installed a float safety switch and also an access to put algicide down the drain line.
Service call “water leak from A/C” Not having a safety switch installed on your A/C drain can result in major damage to the home. On this particular call the damage was quite severe resulting in structural damage. I installed a float safety switch and also an access to put algicide down the drain line.
When we clean a A/C system we clean the whole thing !
Another R22 system bites the dust!! Replacing an old R22 system that the coil started leaking on and the Landlord decided to upgrade before it really started causing problems not to mention the added cost because of it being a R22 system.
Critters can reek havoc underneath your house if you don’t take the necessary steps to prevent them from getting in
As an HVAC technician, I recently completed a mini-split installation at a restaurant on the water in downtown Pensacola. This job was particularly noteworthy because of the unique challenges that came with the location. The restaurant is situated on the water, which presented several issues that needed to be addressed before the installation could proceed. First, we needed to ensure that the outdoor unit was securely mounted on a sturdy wall mount to withstand the potential impact of hurricanes
I have successfully finished cleaning the condenser coil and will now check the capacitor and Contactor. The capacitor and Contactor are two important components that need to be checked after cleaning the condenser coil. The capacitor helps to regulate the voltage and current flow to the motor, while the Contactor helps to control the power flow to the motor. Checking these components is essential to ensure that the motor is operating correctly and efficiently.
I am a skilled professional that works for a Kadeco Inc company. As a professional, I completed a job where I cleaned the coils of an A/C unit. This is a crucial step in ensuring that the unit can efficiently cool a home. The unit in question was severely clogged with debris, making it unable to preform at its best. By cleaning the coils, I was able to restore the unit's ability to efficiently cool the home, ensuring that the occupants would be comfortable during the hot summer months.
I recently finished installing a 2-ton package unit on the roof of an office/mail room. The unit was part of a comprehensive HVAC system upgrade for the building. The process involved careful planning, precise measurements, and skilled installation techniques. The unit was carefully lifted onto the roof and secured in place using specialized equipment and techniques. The unit was then connected to the existing ductwork and electrical wiring, and tested to ensure proper functionality. The job was completed successfully, and the client was pleased with the results.
Changing out a rooftop package unit at a condominium
I was called to a service call where contractors were using the A/C system during a remodel. After a period of time, they noticed there was no air flow. Upon inspection, I found that they had run the A/C system while there was still construction going on. This caused damage to the system and blocked the airflow.
As an HVAC technician, I recently completed a job where I fixed a fan problem that caused a massive freeze-up inside a house. The issue was identified when the homeowner noticed that the air conditioner was not working properly. Upon further investigation, I discovered that the fan motor was not functioning correctly, which led to a buildup of ice on the evaporator coil. This caused the system to freeze up, resulting in no airflow and inadequate heating or cooling.To solve the problem, I removed the fan motor and inspected it for any signs of damage. I also checked the wiring and connections to ensure they were secure. After making the necessary repairs, I reinstalled the fan motor and tested the system to ensure it was working properly. The homeowner was extremely pleased with the results, as the system was now functioning correctly and providing adequate heating and cooling. They were also impressed with my professionalism and attention to detail, which contributed to the successful
Trouble shooting a A/C system . No cooling !
I recently completed a job replacing a roof vent for an insurance company. As a skilled and experienced home service professional, I carefully assessed the situation and removed the old vent. I then installed the new vent, making sure it was securely fastened and in line with industry standards. I also took the time to clean up the work area, ensuring that everything was left neat and tidy. The client was pleased with the results and the insurance company was happy with the fix.
Changing out a rooftop package unit on a condo !
Replacing the supply and return flex duct on package unit for a commercial customer.
We did AC closet ceiling, bringing it up to code house could be sold
Service Call - Condenser fan motor runs for 2 minutes and stops. Troubleshooting found condenser fan motor module bad. Replaced fan motor purrrs like a kitten!
PM Service on one of our Commercial Accounts A/C systems. Getting them checked before the hot weather.
Maintenance done! She’s all nice and clean and ready to face summer.
KADECO Team doing a Maintenance on A/C system getting it ready for Summer!
Service call - A/C not cooling! Troubleshooting found blower motor bad. This unit is an excellent example of why A/C units need regular maintenance.
A inside the attic, looking for and working on ducting
New condenser and air handler in place almost ready for start up!
New condenser and air handler in place almost ready for start up!
Another leaking, antiquated R22 system being replaced by the KADECO team
Reinstalling the air handler after repairs were made addressing floor issues. KADECO Tech. Levi rebuilding plenum making sure it is well sealed.
Spring Cleaning - Now is the best time to get those A/C systems cleaned and ready before the Summer heat!
Service call - blower fan making noise. Found loose set screw, centered fan and tightened set screw
Replaced condenser after compressor in old unit failed.
Removed unit for repairs and while unit was out cleaned coil and blower
Equipment upgrade from an old leaking 2 ton to a Grandair 2.5 ton Heat pump ! Before summer hits!
Completed , 20 ton commercial packaged unit for a church .
20 ton Gas Package unit for a church . Replacement for a 20 year old unit . On its way ! Progress ! Trane!
Doing a 20 year long over due coil cleaning and filter change on a resturant. On. 15 ton roof top package unit . Did a full PM . .
Installed 2 - 3 ton minisplit systems in a store .
Getting refill of nitrogen , to Finnish a job .